Tampilkan postingan dengan label pool. Tampilkan semua postingan
Tampilkan postingan dengan label pool. Tampilkan semua postingan

Jumat, 22 April 2016

new metal shop open house

,
 
were going to have a little celebration/open house tomorrow, on sunday, the 29th .. hours are from 2 to 5 .. come on by and check out sams new space, and see some of the projects hes been working on.    
the actual address is 23 goodwood lane, which is one mile up danby mountain road from route 30 in dorset, vermont. goodwood lane is on the left and 23 is the first driveway on the left.



light refreshments and good company
Read more

Sabtu, 16 April 2016

another custom pool table

,
well, theres not much to add in this blog post as its pretty much the exact same table as the one below, featured in this post from last december.  i do like the dark green felt and the curly maple rails, but otherwise, theres not much to add.  thanks again to my favorite fine woodworking pool table article.

we used the same types  of beams and blinds from the same supplier as last year ..
and the construction was pretty much identical ..
clickthe photos to enlarge them
 dark green simonis cloth
the set up was straightforward and it played exactly like the last one .. 
as you can see from the table in action video,
i think i missed a few more shots this time, but on the whole, 
the speed, sound and cushion action was identical to last years edition.
below are a few other pool table in action videos starring yours truly, who is
not quite as sharp as he used to be ...

the other table like this one
murphy table video
other pool tables we have made





Read more

Rabu, 30 Maret 2016

another post and beam pool table

,
this is what a set of pool table supplies looks like when it arrives here at our shop ... well, its actually not always quite this beat up, but we have had a couple sets of slate arrive in more than one piece ... better luck this time.  no lost pieces; no broken slate.  click the photos to enlarge them, though youll have to bear with me as i learn adobe lightroom.  my ancient photoshop 7 program stopped working with the last windows upgrade .. i am NOT happy about that.  image/adjust/autolevels .. i am really missing that one.
roughed out rails and cushion wood and cushions above
 
 miracle of miracles .. it is to be exactly like the one above that we made and 
installed about this time last year.
were even using the same drawing, materials, and cutlist.
 here we go .. the new guy chris, finished the slate support frame last thursday ..
 
 and here he is beginning the assembly of the base
 all together last friday ..
 and today we added the slate frame and the slates below
 as of the end of the day today, we had the rubber cushions glued on to the poplar, and 
tomorrow well get them bolted to the slate and add the curly maple rails ...
i love a pool table project ..
and just sos you know were not loafing, weve got some other stuff going on in the shop too .. 
a 12 cherry chest of drawers above, with bookcases and ebony and quartered cherry details
and this 9 curly maple trestle dining table with an inlay.  trevors got that one in the finish room now.
more on those projects later ..
for more pool table posts, click on this link
Read more

Minggu, 27 Maret 2016

new steel and wlanut pool table

,
ok .. weve gopt another steel and wlanut pool table going here .. same as the one below from 2012, only an 8 footer instead of a full size 9 foot table .. its going to be just as cool though .  
click the photos to enlarge them
we added an adjustable feature to the leg as the last building was not as level as some ...
lots of parts with angles
sam took all the measurements and angles from the cad drawing above and trevor whipped up some welding jigs for him on the cnc



end jig
long side
heres a photo of the original that we sent to chicago in 2012

we assembled the base as soon as sam had it welded up.  well do the patina on the steel after the rail and cushion work are completed .. even after at least 15 tables, we occasionally refer to a fine woodworking article by paul bowman from 1989.

this client requested steel diamond sights to go with the base .. i started with some 1/8 by 1/2" steel and made a jig to cut the diamonds on a 45 degree angle .. it was fussy, but once i go tthe set up, it was easy to make the ones i needed, plus an extra set for next time.

chris and trevor worked on the rails and diamond inlays this week .. were awaiting the arrival of the custom pockets, which could hold us up for a week or so .. well see
that gave us some time to work on the cue rack, and all it needs now is some final sanding and staining and some patina on the steel parts .. 


so more photos as we progress .. there is quite a long blog post on the first table, and this one will be more or less the same ... we like pool tables ... heres a link to some others weve made over the years and lots of links to other blog posts at the end of that post as well as in the category heading to the right called
custom pool tables
im a pool player and qw always enjoy a new challenge

Read more

Kamis, 17 Maret 2016

why we make things and why it matters

,
hmmmm ... i think peter korn has been looking over my shoulder for the last 40 years ... and, he has the way with words to get what he has been seeing down on paper so i can understand some of the things that flit through my brain just below my level of consciousness ... like things i try to verbalize sometimes when people ask me about how or why i started making furniture , and do i like it as much as i seem to? etc .. i didnt always know how to answer those questions, but now, some of it has kind of been explained it to me through mr. korns book.  my friends bill and steve and pete and all the other folks i know who have been struggling through making a living as furniture makers, builders, potters, glass blowers, masons and sculptors for the last 35 years, are part of a cultural thing, and, as mr. korn says, most craftspeople he knows kind of stumbled into the party while they were looking for a good life.  amen to that.  in the 60s and 70s we were in fact searching.  back to the land .. self sufficiency .. organic gardening with sam ogden ... living the good life with helen and scott nearing .. an alternative path to the life most people the generation before us, (our parents), were living.

when i started as a carpenter in 1973, like peter, i was fascinated by the problem solving aspects of the job. then the dexterity and skill thing relating to quality added another level of challenge and interest.  from there, it took just one short lay off from my carpentry job in 1979 to transition to full time furniture making, and ultimately, the good life i was seeking.  i have been lucky, i am the first to admit.  building stuff has been very good to me.  i have had the benefit of a supportive family and community, and amazingly, a steady supply of wonderful and interesting clients.  i have worked hard for sure, but its never really, and still doesnt really, feel exactly like work .. its just what i do, and how my life goes.  peters path was similar to mine to start, but along the way, after experiencing a bout with cancer, and a typical struggle to make a living building furniture, his path moved away from furniture design and building, and into education and school building.  but, his roots are my roots.  his background thoughts are my background thoughts.  the engaged pursuit of quality is a rewarding pursuit that as furniture makers, or any other kind of artist or artisan, we get to buck up to everyday.  in my humble opinion, the engaged pursuit of quality is a concept for everyone to pursue daily in his or her field of endeavor.  its a great concept.

i also like what peter has to say about design, and how it begins with two things, the intention to create and a problem to be solved.  and how it is a skill like any other and can be learned, which i can attest to personally, as i had not a clue about design when i started making stuff ... kit was the one with eye, and she painstakingly taught me how to see ... four years of college and a degree, and not one single art course.  design can be learned, and some people take to it more easily than others for sure, but if you put in your time and choose your references carefully, you can most likely find you own voice.

another thing peter discusses that is important to me now is that as his focus changed from furniture making to school making, his work changed from working with things to working with words, and one of his biggest surprises was how much he took to writing.  that has also been a surprise to me too after 700+ posts and six years of writing this blog.  i spent 16 years getting a formal education, during which i avoided writing pretty much at all costs.  now, for me, as for him, it is just another medium through which we think.  as peter mentions for himself, (now that he has pointed it out), working with wood, words, (and for me the five other people in my shop), are all different forms of the same essential endeavor.  anyway, the book is a good read if youre looking to think about why we make stuff and why that is a good and important process.  friends who have attended his school have good things to say about it, and at some point, i am planning to pay him a visit up there on the coast of maine ... enjoy!  you may not fold over as many pages as i did, but there is something there for everyone ...
more info, more book reviews, and interviews at this link

and lastly on the why we make things subject, i remember reading something recently that bono said in rolling stone regarding lou reeds passing.  i cant find the exact quote, but he said something about lou like this:
 the nice thing about people who spend their whole life making things is that 
after they go, we still have the things. 

2/13/14 .. found it ... heres the actual quote

Read more

Sabtu, 12 Maret 2016

another round walnut table new pedestal design

,

one of our new clients came up with a concept for a variation on one of our tables that was really clever.
click the photos to enlarge them ...
she asked if we could make this table we made in 2013 open to have 4 of leaves inserted. 
it seemed like it could work, so we made a model, which she accepted and we were off to new design land.

 
 all finished now, but these dark tables are tough to photograph
 with 2 of the three leaves
lots of pieces
cad drawing showing placemats and seating when open and closed
some fine walnut from irion lumber
since we had made the model on the cnc from the cad drawing, it was a simple matter for trevor to cut some full size templates for the base pieces from mdf and lay them out on the 12/4 stock
joinery details
 glue up
the finished pedestals
the rest, as they say, was just an exercise .. cut the halves, cut the apron pieces, install the holes and pins and catches ... using our trusty jig
more info on this at the blog link above

tah dah
disassembly, and final sanding .. stain and finish next week sometime
Read more
 

Blog Woodworking Plans Copyright © 2016 -- Powered by Blogger