Tampilkan postingan dengan label open. Tampilkan semua postingan
Tampilkan postingan dengan label open. Tampilkan semua postingan

Rabu, 11 Mei 2016

a couple of white oak tables

,

we shipped two tables to marblehead yesterday.  theyve been in the works for a while, pending completion of a remodeling project in the house.  the dining table was 12 long with the leaves on the ends, and the coffee table was a pretty good sized one too at 48 x 68. 

we started with some 8/4 plain sawn white oak from hal moore at adirondack hardwoods..
the construction of the base was straightforward mortise and tenon and the leg style was based on a drawing the clients architect sent us of the leg on the new kitchen island.
the clients wanted to occasionally extend the table, but didnt want the leaves in the center, so sam fabricated some 3/4 square steel pull out supports.
and chris added the wooden locators as well as some steel locking devices to keep the leaves attached to the table when they were added.
closed, the leaf supports are totally unobstrusive.


weve made quite a number of these classic parsons style tables.  for step by step construction tips and a brief history of the origin of the design, check these other previous blog posts
looks like a nice place to hang out !



Read more

Minggu, 24 April 2016

open studio this weekend

,
comin up again ... its vermont open studio weekend.  over 200 artists statewide will open their studios this saturday and sunday from 10 to 5 both days.
stop in here to see furniture, handmade jewelry, pottery, architectural metalwork, 
and custom banjos and guitara.
were in dorset, one mile up danby mountain road from route 30.  follow the signs at goodwood lane.
theres a map to our studio here
and a statewide open studio map here



there is an album of photos from previous open studio weekends on our 
dorset custom furniture facebook page
give us a like while youre there, and come on by this weekend.
more photos as we get set up ..
well have lots of stuff for sale at special open studio weekend prices ..
you can see some of the available pieces here
Read more

Jumat, 22 April 2016

new metal shop open house

,
 
were going to have a little celebration/open house tomorrow, on sunday, the 29th .. hours are from 2 to 5 .. come on by and check out sams new space, and see some of the projects hes been working on.    
the actual address is 23 goodwood lane, which is one mile up danby mountain road from route 30 in dorset, vermont. goodwood lane is on the left and 23 is the first driveway on the left.



light refreshments and good company
Read more

Minggu, 17 April 2016

some custom barstools and other news from the metal shop

,
 we delivered 8 barstools to the hill farm project today.
 welded steel, leather by isaiah maccauliffe at bespoke upholstery in manchester, wood by dcf, design by san, sam and nina mooney of ncm design in manchester.. it was an interesting piece of mass production and they came out comfy and elegant.  and relatively affordable ..plus, sam just finished four
shorter ones with no swivels or seats for a friend who will finish them up himself.
they are really affordable that way.  contact sam for details
 swiveling seats and steam bent backs by sawyer bentwood in whitingham, vt.
blackening and finishing by mr. jim
stool frames with swivels recessed into the bottoms of the seats to hide them ...
 and weve got three interesting rebar pieces going to a new pizzeria in sebastapol, california.
they will all have danby vermont marble tops by herb johnson at 
johnson marble and granite in proctor, vt.  they will be on their way monday.
the steel things sticking out will hold the pizza peel and the freshly assembled
pizzas will slide off the marble, onto the peel and into the wood fired oven.
the marble overhangs the ply support by 1" all around.  
the peel and the marble are the same thickness.
 and another section of rail is in
 the trout are biting .. check out old toothy here .. click to enlarge it!!
 
happy and productive man in the new metal shop .. 
sams off tomorrow to a hammer making weekend with pat quinn in glens falls, new york

Read more

Rabu, 06 April 2016

open studio good to go !

,
ok, after a couple days of cleaning and organizing, were good to go for open studio #23 ... weve got some things to see, some things for sale, and the cleanest shop since this time last year.  i whine and moan about how much time it takes, but it always feels good when we are really clean (for us), like now, and ready to open the doors.  come by if you can, saturday or sunday, 10 to 5.  lots to see, like the big slab of mahogany above.  click the photos to enlarge them.
 
 wood shop at about 4:00 ... everybody gone but will and kit .  a reclaimed chestnut king size bed, and a 12 white oak table ready to be finished next week...
 ive had pottery out in the past, but this time, for the first time, there will  be prices on the back.
 sams metal shop is clean and the new lathe is ready to be wired up
 as usual, the banjo shop area is neat as a pin.
 and kit is setting up jer jewelry in the finish room .  the mahogany slab is in there as well as the claro walnut slab for sale on the wall, and theres an oak slab too that would make a small dining table 
or a nice coffee table.
 still waiting for the house to be finished to ship the pool table to long island
 the table from last years statehojuse show is still looking for a home.
its a little outside the box, but the right person may come by this weekend.
 ready to finish ... headed to marblehead
 our new temporary gallery over the metal shop is set up, and trevor has a few things for sale there too.
and the wild azaleas are blooming ...
Read more

Kamis, 31 Maret 2016

its that time again open studio weekend

,
ok, we have been doing open studio pretty much since the beginning, and this is the 22nd year that this event has taken place.  this year there are over 230 vermont artists and craftsfolks who will be cleaning their workspaces friday and emailing their neighbors to stop by this weekend.  as usual, well be open saturday and sunday from 10 to 5.  it looks like we could get some rain, which could be good, could be bad.  you never know.  if you havent seen sams new metal shop, this weekend would be a good time.  hell be fishing on the rapid river in maine for the weekend, but kit or will or i will be happy to show you around.  kit will have her jewelery on display, and will will we be there at least in the afternoons to talk banjos.  come by if you can.  

below are some links and photos from my earlier blog posts.
open studio 2013
open studio 2012
open studio 2011
open studio 2010
open studio 2009
open studio 2008
 look for the yellow signs !!
 ill have a few small pieces for sale
 and the shop will be pretty clean 
unlike the 2010 open studio, mr. lucky will not be in attendance this year
Read more

Senin, 21 Maret 2016

mosheim clothing store pottstown pa 1882

,
well, isnt the internet interesting .. i recently received a message from someone on facebook (who remembered me from before 1956) informing me that someone on a pottstown, pennsylvania facebook page had mentioned or asked for information on the mosheim clothing store on high street.  the person who sent me the message remembered me from a really long time ago, googled me, found me, and asked if i had any pictures.  well, we lived in pottstown until 1956, which, i believe was very shortly after the store closed.  i think my grandfather died in 1953, my uncle had already established his own clothing store in nearby pennsburgh, and my father was an electrical engineer, not a clothing salesman.  so that, as they say, was about it, and the store closed.  the image above was made by a friend of mine from a glass negative that somehow survived over 100 years.  that negative is  around here somewhere.  if you click and enlarge the image, you can see the trolley tracks, and in the lower right hand corner, the date, 1907.  pretty cool. and the actual image is quite crispy and more detailed than this picture of it that i took where it hangs in a poorly lit area by the pool table ..
the smaller image up in the corner is later, after the bank next door became more successful it appears.  the victorian stuff is toned down some in this image.  as mentioned below, the front of the store was remodeled in 1933, and in this photo, the trolley tracks are gone and are replaced by cars.

here follows a brief history from a mention in the pottstown mercury of 1937 .. samuel mosheim was my great grandfather and our son sams namesake ...
" Mosheim Store Founded in 1882 Nine years after he landed on the shores of the United States following his emigration from Germany, the late Samuel Mosheim. one of the pioneer merchants of Pottstown, founded the present Mosheim Clothing company. He opened a store at 144 High street, in 1882, and the store became known as S. Mosheim Clothing store. In 1897 the founder moved to the present location, 207 High street. The business was conducted as a sole proprietorship until Mosheim’s retirement in 1921. Upon his retirement his sons, Maurice and Edward Mosheim, and William Shively and Walter Richards formed the Mosheim Clothing company. The founder died in January, 1930. In 1933 the store was enlarged. The rear was extended and the front rebuilt. The store throughout was remodeled. The past February the interior of the establishment was modernized. The store deals solely in men’s clothing, hats and furnishings."

my parents spent their final years in boyertown, close to pottstown, and we would often ride around pottstown and my parents would reminisce about the 45 years they spent there while i would try to remember stuff from my first 9 years.  the drawing and photo below is of the house we lived in at 320 york street, until we moved to norristown, which was 20 miles closer to center city philadelphia, where my father worked at united engineers and constructors, later a division of raytheon, the defense contractor.

the drawing below i made for my parents for christmas in 2004.  the photo below it that shows the mosheim clothing store, now the china pan, and our house on york street sometime im guessing in the late 90s.

and while i was on the pottstown facebook page, i noticed this post listing the projects for the pottstown location of bethlehem steel, projects my other grandfather likely drove some rivets into .. the plant was obviously a pretty big deal
John Bondola
heres a list of beth steel/Pottstown fabrications, after historical golden gate. road bridges for pa turnpike, new Madison sq. garden/grand central. local HS buildings, including Boyertown & downingtown. varrazano narrows bridge, air vents for Lincoln and Holland tunnel, rfk stadium, ( first multi-purpose stadium). DC and NY subway structures, walt Whitman, twin bridges, DE, (with US steel), and finally, the last job before closure, in 76/77, blast furnace casings for sparrows point plant, which was secured for naval contracts.

Read more
 

Blog Woodworking Plans Copyright © 2016 -- Powered by Blogger